Stainless steel sink rack measures 17.7 x 13.7 inches.

Sink guard with rear drain.

Washing up grid: stainless steel.

Sink Base Rack Dish Drainer Glassware Tableware

Sink Rack for Single Bowl Kitchen Sinks. Please measure 1 inch from the bottom of your kitchen sink, the length and width should be 1/2 inch smaller than the actual kitchen sink.

Manufactured in the UK from high quality Stainless Steel.

45.2D x 36.8W x 3.2H centimetres

Protectors both your sink and your washing up from getting damaged.

Rubber feet for extra sturdiness and support.

[Measure the Correct Size] You must measure within 1 inch from the bottom of the sink to get the correct size of the grid Instead, measure the top dimension inside the sink. Also, the length and width of the sink protector should be 0.3 inches smaller than the dimensions of the sink. Also, check that the radius of the grid and the location of the drain holes match the sink.

304 Stainless Steel Sink Protectors Grid Double Bowl Sink Bottom Grid Multifunctional Dishes Drainer Grid kitchen sink protector grid for Sink Protectors Grid for Kitchen Sink Grate for Bottom Kitchen Sink Rack kitchen sink grate

[Multi-functional Protective Grid] This sink grid not only protects your kitchen sink, but you can also use it to drain plates, vegetables, fruits, defrost food, and as a pot rack, heat pad, baked goods cooling rack, shelves.

[Sink Grille Size] This sink protector grid is designed to be installed on the bottom of a sink measuring 13.4 x 11.83 inches with R50 corners and drain cut-outs for double sinks, providing protection for your kitchen sink, each set includes 2 stainless steel sink protector grille drain racks.

[Protect Sink] The bottom legs of the kitchen sink protector are designed with rubber pads to protect the sink from scratches and damages caused by pots, pans, plates, cutlery, cutters, spatulas, glasses and more. The stainless steel sink protector improves sink drainage by allowing water to flow freely underneath plates and cutlery, perfect for kitchen, bathroom and laundry room sinks.

✅【Prodoct Dimension】: The bottom sink grate measures 73cm L x 40cm W, The rear drain hole diameter 4.7" (120mm). The sink grids consists of 3 separate pieces that can be easily assembled by plugging them together and pressing on the clips. Please pay attention whether the drain hole position aligns with the size and position of your kitchen sink's drain hole.

✅【Extra Sink Strainer and Rubber Feet】: Comes with a extra sink strainer in 4.41" diameter, no more clogging the drain during dishwashing. And the rubber protective feet can reduce noise, protcet your sink from scratched, Not easy to fall and slide.

✅【Multi-Functional】: The Sink rack can allow water to flow away freely underneath your dishes and cutlery, which solved the problem of standing water in the sink when dishes are in it; You can use it as a drainer for rinsed vegetables, thawing of meat, heat insulation, etc.

✅【High Quality Materials】: Our sink rack made of corrosion-resistant and rust resistant chrome-plated stainless steel, The excellent surface treatment looks smooth, modern and stylish in your kitchen sink.

✅【Notes】: Please Measuring the Inner Size of the Sink: The length and width of the sink should be 1/2" larger than the grid. Make sure the dimensions of the both ends match the grid.

Color: silver

STYLISH: Polished is fashionable and matches any decor. STURDY: Non-skid plastic feet prevent grid from slipping

PROTECTIVE SINK GRID: Steel grid protects sink bottom, pots, pans, plates, silverware, glasses, and mugs. perfect for kitchen, bathroom, and laundry room sinks

: Crafted with rust- steel for years of quality use

Material: Stainless steel

【Multi-functional Protective Grid】This sink grid not only protects your kitchen sink, but you can also use it to drain plates, vegetables, fruits, defrost food, and as a pot rack, heat pad, baked goods cooling rack, shelves.

【Protect Sink】The bottom legs of the kitchen sink protector are designed with rubber pads to protect the sink from scratches and damages caused by pots, pans, plates, cutlery, cutters, spatulas, glasses and more. The stainless steel sink protector improves sink drainage by allowing water to flow freely underneath plates and cutlery, perfect for kitchen, bathroom and laundry room sinks.

【Sink Grille Size】This sink protector grid is designed to be installed on the bottom of a sink measuring 13.4 x 11.83 inches with R50 corners and drain cut-outs for double sinks, providing protection for your kitchen sink, each set includes 2 stainless steel sink protector grille drain racks.

【Rust Resistant 304 Stainless Steel]】his sink bottom grid is made of 304 stainless steel for rust resistance and durability, effortless cleaning and long-lasting performance. The superior finish adds a stylish texture to the kitchen sink.

【Measure the Correct Size】You must measure within 1 inch from the bottom of the sink to get the correct size of the grid Instead, measure the top dimension inside the sink. Also, the length and width of the sink protector should be 0.3 inches smaller than the dimensions of the sink. Also, check that the radius of the grid and the location of the drain holes match the sink.

Function2:Kitchen Sink Strainer

Function1:Stainless Steel Sink Drainer Rack

Function3:Dish Drainer Rack

Function4:Sink Drying Rack

Protects sink bottom from nicks and scratches

Grid design allows water to flow through freely - center hole allows easy drain access

Non-skid plastic feet prevent slipping

Made of durable Polished Stainless Steel

32.5cm x 28cm