[Upgraded Motion Activated Led Strip Light]- The led rope lights length extends to 10M. And its motion activated box design is in line with ergonomics better to be used more comfortable, and its sensing range will extend to 6M to be more sensitive.

[2 Motion Activated Modes]- Night Mode: When it detects your movement within 4-6m in the dark the light will automatically turn on, and automatically turn off after the time you set for 1/3/10 minutes. Day Mode: Lights will automatically turn on/off when motion within 4-6m is detected.

[Bright LEDs]- 288 SMD 2835 LEDs with a luminous intensity of 1151lm, illuminating the dark corners and making you see everything clearly even at a pitch black night. This motion sensor led strip light is perfect for bedrooms, living rooms, bathrooms, stairs, hallways, kitchens, dressers, closets and storage rooms.

[Cuttable And Linkable]-LED strips lights are flexible, bendable and not easy to break. Every 3 LED beads and a cutting mark make up a unit, please cut them according to the cutting mark.

[Safe Using and Easy Installation]- Strong self-adhesive straps stick to any dry and clean interior surface for easy light bar installation, with extra glue clips and screws for a secure connection. The LED strip has been certified by SGS, and the power supply is certified by ETL, with short circuit protection. You can use it safely

✔️【Motion Sensor LED Light Strip Indoor】HOUHUI 5meter motion sensor led strip lights with 150 high-brightness 2835 LED beads, it will guide you through the room safely with warm white light in the dark without disturbing others. It will lights up during exercise and automatically turns off after leaving, fantastic energy saving and environmentally friendly ensures an extra long life for your light.

✔️【Double Motion Sensor LED Strip Lights】A roll of 5 meter warm white LED strip lights has a motion sensor on each end. The sensor can be activated in two different directions. It is perfect for 2 entrances for stairs, corridor and double bed. 60 seconds automatic shut-off design. the led light strip will be activated by motion all day and auto shut off after 60 seconds of no motion.

✔️【12V Dual Sensor Under Bed Lights】As long as one end is powered, the two motion sensors can work at the same time. The working voltage is 12 volt, extremely low heat, touchable and safety for children. The dual motion activated led light strip is non-waterproof design for indoor use only.

✔️【Easy Installation】With self-adhesive tape can be easily stuck on dry, flat surface. It also can be cut and connected, you can easily DIY the length you want. It can be widely use in stairs, under bed lights, under cabinet lights, hallway, around walls, computer lighting, TV back lights, counter lighting, closet lighting, shelf lighting, etc.

✔️【Plug in Under Cabinet Lights Kit】HOUHUI double motion sensor LED strip night light kit include: 1 x 5meter led strip lights with Two motion sensors, 1 x 12V Adapter, 2 x 3-PIN Connecting Cables. (Note: The light strip is non-waterproof.)

❤【PIR Motion & MAN Mode】Switch-select: Motion-activated lighting within 2-5m (day/night) or manual control.

❤【Easy Installation & Cuttable】An adhesive strip is easily attached to the lamp body and removable from it. No tools, screws or nuts are required. You can cut the strip light to the appropriate length.

❤【6000K Cold White】With 30 pieces of 2835 LEDs, LUXJET Motion Sensor Light provides enough light to make sure you never stumble in the dark. Fantastic energy-saving and environmentally friendly ensures an extra-long life for your light.

❤【Battery Operates】Our LUXJET Motion Sensor LED Strip is powered by a built-in lithium battery. USB-C cable charged. With passive infrared technology, reliable performance, and high sensitivity, you can accurately detect your movement.

❤【Lightweight & Portable】Bar-shaped and compact size make it an ideal night light for your bedroom, bathroom, stairs, hall, kitchen, closet, etc.

Energy-Efficient Motion Sensor Lights: Setting the under cabinet lights on motion sensor mode, they automatically turn on when human motion is detected within a 10 ft / 120°range in a dark or low light environment, and auto-off after 20 seconds of no motion detected. More convenience for your night lighting. No longer have to worry about tripping on the step in the dark trying to turn on the switch

Soft Bright Dimmable Under Cupboard Kitchen Lights: Built-in 40pcs energy-saving bright LEDs and a non-glare frosted cover, the motion sensor lights are bright and eye-protection. In addition, our rechargeable strip light has 5 levels of brightness, you can adjust the light brightness to suit different lighting requirements. For example, low light as a night light, natural light for reading

USB-C Rechargeable Under Cabinet Lights: These led strip light comes with 1800mAh built-in battery and a USB-c cable. Compared to other rechargeable motion sensor night light on the market, resulting in longer actual endurance, eliminating the need for frequent charging. One full charge can last up to 7-30 days on Motion Sensor Mode and 10 hours on Always-on Mode at 100% brightness.(Note that the USB wall adapter is not included)

Magnetic Installation, Flexible for All Home Scenarios: With built-in strong magnets, these wireless led lights are easy to install, no need for an electrician. It can be adsorbed directly on ironwork surfaces or use the included adhesive metal plates to stick on anywhere you want. Allows you to change the location easily. It is a good choice for various occasions including kitchen, bedroom, closet, cabinets, counter, pantry, basement, stair, hallway, shelves, etc

Smart Motion Sensor with 3 Lighting Modes: The motion sensor under cabinet lights support three modes to meet the needs of different occasions: ① Automatic mode ② Always-on mode ③ Always-off mode, you can adjust the light as needed. The always-on feature allows you use the motion sensor lights on daytime for a long time task. It can be used in reading, camping and as a flashlight

[ Motion Sensor LED Strip Light 5M ]: The led strip will automatically turn on when movement detected and auto turn off if no motion; JOYLIT motion sensor led strip extend the light strip to 5 meter length applicable for larger scale application.

[ Bright White LED Strip ]: This motion sensor led strip light adopts high bright 2835 smd as light source, and 120LEDs/M high density design, emits a bright white led strip than 30LEDs/M or USB/battery motion sensor light strip.

[ Sensing Range]: The PIR Sensor with a maximum distance of 3M 120-degree, the sensor component installation position should towards the walking direction, better not hidden it as it will affect the sensitive.

[ Day & Night 2 Working Modes ]: At DAY MODE: the light strip will not affected by the ambient light, as long as the sensor detects motion, it will trigger the sensor and the led strip light up automatically; at NIGHT MODE, the sensor will only work in a very dark place, the environment light will affect its sensitivity and working situation.

[ 15s to 300s Delayed Setting]: The light strip will automatically turn off when there is no motion for a long period (15-300s) or when it is out of the motion sensing range, we can set the delay time from 15-300 seconds by rotary the switch, safety, convenience and energy saving.

[USB Powered] - Designed to be powered by 5V USB, it is compatible with USB sockets, USB chargers, power banks, computers, TVs and other devices with USB sockets. Please use a USB device with an output of 2A or higher.

[Motion Sensor or Always-on Mode] - This PAUTIX USB COB LED strip light has a built-in infrared motion sensing and always-on mode, by pressing the "M" button on the controller, you can switch the two modes. In motion sensor mode, when you are close to the sensor (120° range and within 5m), the strip light will turn on; it will automatically turn off after 30 seconds of leaving. In always-on mode, the sensor stops working and the strip light stays on until you turn it off, on this mode, the sensor ball show slight blue colour.

[Upgraded LED Light] - Different from traditional SMD LED strip lights, COB (chip on board) LED strip lights are composed of LEDs that are closely spaced one by one, which looks like a continuous and uniform light, brighter and almost no dark spots! 180° beam angle, wider lighting range. DC5V low voltage, safer to use. Designed with authentic 3M adhesive, the viscosity is at least 10 times that of ordinary adhesives. With a high CRI of 85+, the colour reproduction is more realistic, improving the appeal of the space while protecting your eyes!

[Stepless Dimming & Memory Function] - Long press the on/off button on the controller to stepless brighten or dim. The brightness is between 5% to 100%! The controller has its own power-off memory function. When the controller is powered off and powered on again, the settings before shutting down will be retained and continued, no need to repeat settings!

[Flexible & Easy to DIY] - These COB LED strip lights can't just be bent. Designed to be 8mm wide, it can also be cut every 12.5mm along the cut marks. The remaining strip lights after cutting can also be reconnected simply using connectors or soldering. 150cm extra long cable, no longer worry about cable length!

[Wide Range of Applications] - PAUTIX USB COB LED strip lights are widely used. It can be used as auxiliary lighting for a variety of projects, playing an important role in places where the main light cannot shine, enhancing the sense of spatial hierarchy. You can use it in cabinets, desks, bedrooms, living rooms, stairs, and even in display cabinets, wardrobes, makeup mirrors, and more!

[Packaging & After-sales] - 1 × 2m USB COB LED strip light with motion sensor (USB adapter not included); 1 × User manual. PAUTIX provides each customer with a 5-year after-sales service, and any product problems met, please let us know, we will do a favor for you!

Motion Sensor Strip Lights: The motion sensor range is 120°, sensor distance is 10ft (3m) , Manual delay, you can manually set the delay 20s/60s or steady on, Super saving energy

Day & Night 2 Sensor Modes: Day Mode ☼ means the Light up as long as triggered by the motion; Night Mode ☽ means Only Light up triggered by the motion in the dark

Easy to Install: 2M adhesive can be easily pasted on a smooth surface. The battery box have magnetic strip and comes with 2M double-sided adhesive, which is applicable anywhere

Cuttable Motion Activated LED Light Strip: Every one leds as a unit is with a cutting mark, please cut it according to its cutting mark. Indoor waterproof IP44

Powered by 3xAA Batteries (NOT INCLUDED), really safe and easy to assemble and to put up & take down; Widely use anywhere you need, like kitchen, wardrobe, cabinet, doorway, drawer, cupboards, staircases, under beds etc.

[USB Powered] - Designed to be powered by 5V USB led strip light, it is compatible with USB sockets, USB chargers, power banks, computers, TVs and other devices with USB sockets,much more portable and easy use. Please use a USB device with an output of 2A or higher.

[Motion Sensor or Always-on Mode]: luktix motion sensor cob led strip is of built-in infrared motion sensor which react quickly, the slightest movement will trigger it and illuminate the strip which is quite bright. You can switch freely from the day mode, night mode, on mode and off mode.You also can adjust how long the lights saty on by 4 setting for timer (15 seconds, 30 seconds, 60 seconds, 120 seconds) and how react the light strip by Day, Night and Always On modes

[Stepless Dimming & Memory Function] -In the motion sensor,long press the "+"and "-" button on the controller to stepless brighten or dim. The brightness of usb led strip is from 5% to 100%! The controller has its own power-off memory function. When the controller is powered off and powered on again, the settings before shutting down will be retained and continued, no need to repeat settings!

【Easy to Install】:Motion sensor cob led strip with USB pockets,3000K warm white COB LED lights has a soft and high density specification level, which can also be bent as desired. A strong adhesive is also used on the back, which can be easily attached to a wall or any smooth and clean place. And you can use scissors to cut any length along the interface, or you can work as usual.

[Wide Range of Applications] - luktix USB COB LED strip lights are widely used. usb led strip with motion sensor can be used as auxiliary lighting for a variety of projects, playing an important role in places where the main light cannot shine, enhancing the sense of spatial hierarchy. You can use it in cabinets, desks, bedrooms, living rooms, stairs, and even in display cabinets, wardrobes, makeup mirrors, and more!