***DO NOT use with LiPo/LiFe/Li-Ion batteries

Intended for use with NiMH / NiCd batteries only Up to 8.4v

Trickle charge keeps battery fully charged after charging cycle is completed

【Smart NiMH Charger】This N8 HTRC charger is professionally designed for 2-8s NiMH/NiCD battery(2.4-9.6V) of drone, airsoft, RC car, RC boat, etc. The inner chip uses advanced and accurate -ΔV detection technology to judge whether the battery is full and avoid over-charging. Through the trickle charge to ensure that the battery is fully full, improve the battery life.

【Input and Ouput】 AC input voltage:100-240V. Output power：20W, charging current: 1A/2A. The charging current can be set to 1A or 2A through the switch on the side of the charger according to the capacity of your battery.

【Easy to Use】The charger comes with standard tamiya connector and 3 additional charging cables (standard Tamiya to mini Tamiya cable *2, standard Tamiya to crocodile clip cable). Compact and elegant design, easy to carry and suitable for travel.

【Two-color Indicator】Steady red light indicates that charging is in progress, steady green light indicates that charging is completed, red and green flash alternately indicates that the battery is not connected.

【Note】This charger is suitable for NiMH / NiCD batteries with standard or mini Tamiya connector. Alligator clips can for DIY. The positive pin (red wire) of the Mini Tamiya connector is round and the negative pin (black wire) is square. Please do not charge when left unattended. It uses fireproof enclosure, which is safe and reliable.

[Compatible with]: There are two battery ports built into the charger. The 3 pin port is suitable for 7.4V lithium battery. The 4 pin port is suitable for 11.1V lithium battery. Ideal for 7.4V 11.1V 2S - 3S Lithium Batteries. Charge two kinds of lithium batteries with different voltages at the same time, both of which are independent ports, and the charging does not affect each other. This charger is only suitable for lithium batteries.

[Fast Charge]: AC input voltage: 100V - 240V Max. Charging current: 3 x 800mA. Charging time is only 1-5 hours. The specific charging time depends on your battery capacity.

[Product Features]: Built-in independent lithium battery balancer that ensures that each cell is fully charged and protected to maximize battery life and performance. Lipo battery balancer with over current protection, over temperature protection, short circuit protection and over voltage protection.

[Package Content]: 1 pcs B3 Lipo Charger; 1 pcs power cable. Case packaging keeps the charger safe in transit, allowing you to receive a brand new undamaged Lipo charger.

[LED Indicator]: When you connect the charger to the 7.4V lithium battery, Coll1 Coll2 starts to light up red, and the 7.4V lithium battery is being charged. When you connect the 11.1V lithium battery, Coll1 Coll2 Coll3 starts to light red, and the 11.1V lithium battery is charging. When the lithium battery is fully charged, the LED indicator will be in a steady green state.

【Intelligent nimh charger】charge for nimh 2-10S battery, 2.4v 3.6v 4.8v 6v 7.2v 8.4v 9.6v 10.8v 12v nimh, it can automatically detect the battery voltage, switch to the corresponding charge mode, Se si riscontrano problemi durante l'uso, si prega di contattare il nostro servizio clienti.

【LED indicator】the LED indicates the state of charge. Red: charge; green: cells fully charged or no cells; battery fault: red LED flashes.

【High safety】100-240v input, easy to use, Pulse current output 2-6S = 800mA, 7-10S == 500mA, it takes about 10 hours for most rc batteries (may vary depending on battery capacity),pulse current can avoid overheating and overcurrent, which can prolong battery life, battery can be fully charged, improve battery performance.

【Multiple protection and Package】: this charger with short-circuit protection, overheating protection and overcurrent protection; had CE and PSE certificates, 45-day free returns and 1-year warranty. Package includes: 1x nimh rc charger and 1x charging cable compatible with Tamiya/Mini Tamiya/SM 2P/JST/HuanQi connector.

【Friendly Sevice】If you encounter any problems while using our products, please contact our customer service personnel to resolve them for you, we offer a 45 day exchange and a 1-year warranty.

Input AC100-240V, output 400-700mA. Applicable to 2.4-12V NIMH NICD battery packs(2-10s) for RC cars, RC boats, RC aircraft, airsoft and other remote control toys. 6 common battery connectors: Standard Tamiya, Mini Tamiya, JST, SM 2P, XH, Futaba.

Use advanced and accurate detection technology to judge whether the battery is full, stop charging in time. Through the trickle charge to ensure that the battery is fully full without overcharging, improve the battery life.

The built-in smart chip provides a comprehensive protection for the battery and charger: temperature protection (for battery packs with temperature-sensitive resistors), short-circuit protection, reverse polarity protection, and overcharging protection.

The intelligent NiMh / NiCd battery charger can automatically determine the number of batteries and automatically adjust the output voltage. Accurate constant current control allows the current to vary by less than 5% and keeps the battery in a healthy state of charge. This charger features CE certification.

Select the correct connector to connect the battery pack to the charger, then plug the charger into a power outlet to easily and safely charge your battery pack. Two-color indicator light, red indicates charging, green indicates charging is complete. Small and light, portable and easy to store, it is ideal for home and travel.

Smart NiMH Charger - This charger is professionally designed for 2-8s NiMH/NiCD battery(2.4-9.6V) of drone, airsoft, RC car, RC boat, etc. The battery is full and avoid over-charging. Through the trickle charge to ensure that the battery is fully full, improve the battery life.

Input and Ouput - AC input voltage:100-240V. Output power：20W, charging current: 1A/2A. The charging current can be set to 1A or 2A through the switch on the side of the charger according to the capacity of your battery.

Easy to Use - The charger comes with standard tamiya connector and 3 additional charging cables (standard Tamiya to mini Tamiya cable *2, standard Tamiya to crocodile clip cable). Compact and elegant design, easy to carry and suitable for travel.

Two-color Indicator - Steady red light indicates that charging is in progress, steady green light indicates that charging is completed, red and green flash alternately indicates that the battery is not connected.

Note - This charger is suitable for NiMH / NiCD batteries with standard or mini Tamiya connector. Alligator clips can for DIY. The positive pin (red wire) of the Mini Tamiya connector is round and the negative pin (black wire) is square. Please do not charge when left unattended. It uses fireproof enclosure, which is safe and reliable.

Smart airsoft lipo battery charger for 2S 3S/7.4V 11.1V lipo airsoft gun battery.

Input voltage:100-240V AC,output current:800mA.

3 LED indicates the charging status:Red-charging,Green-full charged.

Balance charger:each cell is charged by independent line,to make sure each cell is fully charged.

High quality material,light weight for convenient use.

This USB battery connector is used to charge 7.4V lithium batteries and is compatible with RC car drones ,Quadcopters ,SplatRball water gun etc...

Parameters :Interface type USB/SM-4P, input voltage 5V, output 7.4V, cable length 50cm.

It can be charged directly by connecting to a rechargeable battery or USB dock, making it easy to use anywhere, anytime.

Equipped with LED indicator, real-time monitoring of charging status, green light when idle, red light when charging, green light when full.

With multiple protection functions, over voltage protection, over current protection, over voltage protection, more safety.